Expert Answers about Chevrolet RV Water Inlets
- Will Valterra City Water Inlet Fit on 2000 Keystone Bobcat RV
- The Valterra City Water Inlet # A01-2001VP is a universal fit so it will work on your RV as long as the measurements for install are the same. The Valterra is 7-1/2 by 5-1/4 inches.
All of the hardware and tape for installation is included.
view full answer... - Blow Out Plug Needed To Winterize RV Fresh Water Lines
- The RV High Flow Water Pressure Regulator # 37262205 limits the psi of the water connected to your city water inlet. If you were just wanting to be able to blow air through your lines to winterize your trailer you'd want the Valterra RV Blow Out Plug # P23518LFVP. This comes with a Shrader valve to easily connect a compressor and blow out the water lines.
view full answer... - Recommended City Water Inlet W/ Check Valve for a 2005 Fleetwood Tioga 22B
- For your 2005 Fleetwood Tioga 22B you're going to want to use the RV City Water Inlet with Brass Check Valve # 37262145.
This is going to be the screw on style that will fit a 1-1/2" diameter cutout, has a removable screen filter to help keep debris out, and includes a tethered rubber cap that will cover the connection when not in use.
Also, the reason I'd recommend going with the screw on style over the hose clamp, is going to be to do to the fact that it's just much easier to attach...
view full answer... - What RV Anti-Freeze Pump System Do You Recommend for Winterizing?
- I have a great solution for you. Unfortunately, we do not carry any a 12v or 110v system, but we do carry drill-free options. To use your current RV water lines to transfer anti-freeze, that is the Valterra Water Pump Conversion Kit for RV Winterizing # P23506LFVP. With this option, the 3-way valve permanently connects to your RV's water pump to transfer anti-freeze throughout the water lines.
If you are looking for a hand-pump option, that is the Valterra Antifreeze Hand Pump with City...
view full answer... - Are Additional Fittings Needed To Install The Dometic Full-Timer RV Toilet
- The Dometic Full-Timer RV Toilet # DOM99FR comes with its own hardware included so the only thing you could possibly need would be a longer water supply hose if your current setup up is on the opposite side of the water inlet on this toilet with little to no slack.
If you end up needing a longer hose you'll want to choose from the "faucet" fitting hoses as the "toilet" ones at hardware stores will be too large.
view full answer... - Parts Needed to Power AC and DC Applications on an Enclosed Trailer with Shore Power
- You are correct in that in order to power AC and DC units with shore power, you need a converter. The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 45 Amp, part # PD4045KA, that you looked at is a good choice for this. I've linked to a video review of this converter and included a picture of a typical setup.
Keep in mind that you will need a power inlet to get the shore power. If you don't already have one, you can use the Epicord 30 Amp Twist Lock Power Inlet...
view full answer... - Recommended Hose and Quick Connector for a 2022 Ford Transit T350 Using A Quick Disconnect Hose
- All of our shower heads are going to be only compatible with a standard 1/2" inlet, however since you have quick disconnects you'll want to use an hose with an adapter like the Replacement Hose for Empire Faucets RV Handheld Shower Sets # EM36HR with the D&W Inc. RV and Marine Quick Connect Garden Hose Adapter # PF247007.
Doing this will allow you to use a standard shower head # EM29HR without having to redo your entire setup.
view full answer... - Does the SmartPlug RV Power Inlet Require a Special Cord to Connect From Shore Power
- Yes. In order to use the SmartPlug Replacement RV Power Inlet - 50 Amp # SM56FR you will need to replace your old twist lock power cord with a SmartPlug RV Power Cord - 125/250V - 50 Amp - 30' # SM86FR.
view full answer... - Parts Needed to Connect 100 Lb Propane Tank to Water Heater
- It sounds like what you need is a pigtail to go from the tank to a regulator, then from the regulator you'll need a supply hose that's long enough to reach and connect to the to inlet valve (manifold) on your food truck and that has the correct fitting. Below are the parts I recommend:
1. MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 1' # 100833-12
2. MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet # 108220
3. MB Sturgis...
view full answer... - Parts to Connect 20A Generator Outlet to 30A RV Inlet
- You can connect your generator's 20-amp female outlet to your RV's 30-amp power inlet by using Furrion RV Power Cord Adapter Plug # F3120ADRY along with an extension cord such as 15-foot # A10-3015EH or 10-foot # A10-3010EH.
view full answer... - Extra 30A Socket for SmartPlug RV Power Cord and Stainless Steel Inlet
- Yes! To get another 30A socket to match what comes with the SmartPlug RV Power Cord and Stainless Steel Inlet # SM39FR you just need the part # SM24FR.
Attached is an installation video for you to check out!
view full answer... - Parts Needed to Convert 2018 Leprechaun From 30 Amp to 50 Amp
- To upgrade from 30 amp to 50 amp on your 2018 Leprechaun you will need a new power inlet and power center. For your inlet I recommend the Furrion 50 Amp RV Power Inlet # F52INSBS. Then for a power center you can use the Progressive Dynamics # PD4560K18LS8. You will also need 6 gauge wire for installation.
If you need a 50 amp power cord you can use the Mighty Cord # A10-5036EDBK. You might also want the Mighty Cord RV Power Cord Adapter - 50 Amp Female to 30 Amp Male # A10-3050FBK if...
view full answer... - Parts Needed to Connect 50 Amp Trailer Inlet to 110 Volt Power
- Thank you for the photo as it was very helpful and we do have exactly what you need to connect the 50 amp inlet on your trailer to the 110 volt on your house.
Since there isn't a single adapter you will need two different parts, though using them is very easy. You will start with the Mighty Cord 90-Degree Detachable RV Power Cord # A10-5025ED90, which you will simply plug into your trailer's inlet. Then you will use the Mighty Cord Dog Bone RV Power Cord Adapter # A10-1550, which will...
view full answer... - Recommended Regulator And Adapter Hose To Connect To A 100-lb Propane Tank
- I went ahead and checked to see what we have an unfortunately it does not appear that we have a hose that will connect your regulator with a 3/4" FPOL inlet to your 100-lb propane tank, however I do have another solution.
I know it is not ideal, however to still be able to add a regulator to your 100-lb propane tank, I recommend checking out the MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet # 108220 with the adapter hose MB Sturgis Propane Supply Hose # 100202.
This...
view full answer... - 90-Degree Sewer Hose Adapter That Fits A Standard 3" Fitting And A 3-1/2" Sewer Inlet
- I believe we have exactly what you're looking for, for your 1991 Provost RV.
Take a look at the:
-EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting # F02-3112CL.
This is a clear 90° fitting that will fit onto a standard 3" lug fitting, and will also fit 3" slip and 3", 3-1/2", and 4" threaded sewer inlets.
Attached is a review video for you to check out as well.
view full answer... - 30 Amp Twist Lock Power Cord Extension Cable For A 30 Amp Twist Lock Power Inlet
- Mighty Cord has a 25' twist lock power cord extension, Mighty Cord RV Power Cord - 30 Amps - 25' Long
Item # A10-3025ED90, that will work with your Epicord 30 Amp Twist Lock Power Inlet - White Item # 277-000137.
view full answer... - Replacement Female 30 Amp Twist Lock Connector For Use With Epicord Power Inlet
- So it sounds like you just need a replacement female 30 amp twist lock connector that you can use with the Epicord 30 Amp Twist Lock Power Inlet - White # 277-000137.
We do have what you are looking for, which is the Mighty Cord Replacement Twist Lock Connector for RVs - Female - 30 Amps # A10-30FDT.
I do recommend adding the cover for the connector in order to protect it, which is the Weatherproof Cover with Threaded Ring for Mighty Cord Twist Lock Female Connector - 30 Amps # A10-30CV.
view full answer... - Electrical Cord and Adapter to Connect 50-Amp Motorhome Power Inlet to Standard Household Outlet
- Motorhome 50-amp male power inlets require a cord with a 50 Amp Twist Lock female plug like the one on the Mighty Cord 25-foot # A10-3050EDBK. But since the other end of this cord has a 30-amp male connector, not a 15-amp household supply male connector, you will also need a dogbone adapter # A10-1530HVP to give you the standard 120V male plug to connect to a household outlet.
view full answer... - Parts Needed To Convert An RV From 30 Amps to 50 Amps
- You can upgrade your setup from a 30 amp to a 50 amp but it's going to be pricey and you're likely going to need to hire an electrician.
The first thing you're going to need is to swap out your 30 amp inlet with the SmartPlug RV and Marine Power Inlet # SM79FR. This is going to require you to replace the existing wiring as well to accommodate for the extra amps.
You'll also need a new control center, Progressive Dynamics 4500 Series RV Converter w/ Charge Wizard and AC/DC Distribution...
view full answer... - What Size and Type of Regular to Connect 100-lb Tank to Martin Direct Vent Propane Heater
- According to the installation manual for the Marvin Direct Vent Propane Heaters, the minimum permissible propane gas pressure is 11" WC (water column), which our MB Sturgis Single Stage Regulator # 108072 can supply.
If you are connecting the heater directly to your 100-lb tank, then you will also want a pigtail hose # 37207-30865, to go from the tank valve to the regulator and a supply hose with a 1/4" male NPT fitting to connect at the regulator and a 3/8 female NPT fitting to connect...
view full answer...
Go To Results